whoami7 - Manager
:
/
usr
/
lib
/
dracut
/
modules.d
/
35network-legacy
/
Upload File:
files >> //usr/lib/dracut/modules.d/35network-legacy/ifup.sh
#!/bin/sh # # We don't need to check for ip= errors here, that is handled by the # cmdline parser script # # without $2 means this is for real netroot case # or it is for manually bring up network ie. for kdump scp vmcore PATH=/usr/sbin:/usr/bin:/sbin:/bin type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh # Huh? No $1? [ -z "$1" ] && exit 1 # $netif reads easier than $1 netif=$1 # loopback is always handled the same way if [ "$netif" = "lo" ] ; then ip link set lo up ip addr add 127.0.0.1/8 dev lo exit 0 fi # Run dhclient do_dhcp() { # dhclient-script will mark the netif up and generate the online # event for nfsroot # XXX add -V vendor class and option parsing per kernel local _COUNT=0 local _timeout=$(getargs rd.net.timeout.dhcp=) local _DHCPRETRY=$(getargs rd.net.dhcp.retry=) _DHCPRETRY=${_DHCPRETRY:-1} [ -e /tmp/dhclient.$netif.pid ] && return 0 if ! iface_has_carrier $netif; then warn "No carrier detected on interface $netif" return 1 fi if [ ! -e /run/NetworkManager/conf.d/10-dracut-dhclient.conf ]; then mkdir -p /run/NetworkManager/conf.d echo '[main]' > /run/NetworkManager/conf.d/10-dracut-dhclient.conf echo 'dhcp=dhclient' >>/run/NetworkManager/conf.d/10-dracut-dhclient.conf fi while [ $_COUNT -lt $_DHCPRETRY ]; do info "Starting dhcp for interface $netif" dhclient "$@" \ ${_timeout:+--timeout $_timeout} \ -q \ -1 \ -cf /etc/dhclient.conf \ -pf /tmp/dhclient.$netif.pid \ -lf /tmp/dhclient.$netif.lease \ $netif \ && return 0 _COUNT=$(($_COUNT+1)) [ $_COUNT -lt $_DHCPRETRY ] && sleep 1 done warn "dhcp for interface $netif failed" # nuke those files since we failed; we might retry dhcp again if it's e.g. # `ip=dhcp,dhcp6` and we check for the PID file at the top rm -f /tmp/dhclient.$netif.{pid,lease} return 1 } load_ipv6() { [ -d /proc/sys/net/ipv6 ] && return modprobe ipv6 i=0 while [ ! -d /proc/sys/net/ipv6 ]; do i=$(($i+1)) [ $i -gt 10 ] && break sleep 0.1 done } do_ipv6auto() { local ret load_ipv6 echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects linkup $netif wait_for_ipv6_auto $netif ret=$? [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname return $ret } # Handle static ip configuration do_static() { strglobin $ip '*:*:*' && load_ipv6 if ! iface_has_carrier "$netif"; then warn "No carrier detected on interface $netif" return 1 elif ! linkup "$netif"; then warn "Could not bring interface $netif up!" return 1 fi ip route get "$ip" 2>/dev/null | { read a rest if [ "$a" = "local" ]; then warn "Not assigning $ip to interface $netif, cause it is already assigned!" return 1 fi return 0 } || return 1 [ -n "$macaddr" ] && ip link set address $macaddr dev $netif [ -n "$mtu" ] && ip link set mtu $mtu dev $netif if strglobin $ip '*:*:*'; then # note no ip addr flush for ipv6 ip addr add $ip/$mask ${srv:+peer $srv} dev $netif echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects wait_for_ipv6_dad $netif else if [ -z "$srv" ]; then if command -v arping2 >/dev/null; then if arping2 -q -C 1 -c 2 -I $netif -0 $ip ; then warn "Duplicate address detected for $ip for interface $netif." return 1 fi else if ! arping -f -q -D -c 2 -I $netif $ip ; then warn "Duplicate address detected for $ip for interface $netif." return 1 fi fi fi ip addr flush dev $netif ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif fi [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname return 0 } get_vid() { case "$1" in vlan*) echo ${1#vlan} ;; *.*) echo ${1##*.} ;; esac } # check, if we need VLAN's for this interface if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then unset DO_VLAN NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif" modprobe -b -q 8021q for i in /tmp/vlan.*.${netif}; do [ -e "$i" ] || continue unset vlanname unset phydevice . "$i" if [ -n "$vlanname" ]; then linkup "$phydevice" ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)" ifup "$vlanname" fi done exit 0 fi # Check, if interface is VLAN interface if ! [ -e /tmp/vlan.${netif}.phy ]; then for i in /tmp/vlan.${netif}.*; do [ -e "$i" ] || continue export DO_VLAN=yes break done fi # bridge this interface? if [ -z "$NO_BRIDGE_MASTER" ]; then for i in /tmp/bridge.*.info; do [ -e "$i" ] || continue unset bridgeslaves unset bridgename . "$i" for ethname in $bridgeslaves ; do [ "$netif" != "$ethname" ] && continue NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname linkup $ethname if [ ! -e /tmp/bridge.$bridgename.up ]; then ip link add name $bridgename type bridge echo 0 > /sys/devices/virtual/net/$bridgename/bridge/forward_delay > /tmp/bridge.$bridgename.up fi ip link set dev $ethname master $bridgename ifup $bridgename exit 0 done done fi # enslave this interface to bond? if [ -z "$NO_BOND_MASTER" ]; then for i in /tmp/bond.*.info; do [ -e "$i" ] || continue unset bondslaves unset bondname . "$i" for slave in $bondslaves ; do [ "$netif" != "$slave" ] && continue # already setup [ -e /tmp/bond.$bondname.up ] && exit 0 # wait for all slaves to show up for slave in $bondslaves ; do # try to create the slave (maybe vlan or bridge) NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave if ! ip link show dev $slave >/dev/null 2>&1; then # wait for the last slave to show up exit 0 fi done modprobe -q -b bonding echo "+$bondname" > /sys/class/net/bonding_masters 2>/dev/null ip link set $bondname down # Stolen from ifup-eth # add the bits to setup driver parameters here for arg in $bondoptions ; do key=${arg%%=*}; value=${arg##*=}; # %{value:0:1} is replaced with non-bash specific construct if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then OLDIFS=$IFS; IFS=','; for arp_ip in $value; do echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key done IFS=$OLDIFS; else echo $value > /sys/class/net/${bondname}/bonding/$key fi done linkup $bondname for slave in $bondslaves ; do cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr ip link set $slave down echo "+$slave" > /sys/class/net/$bondname/bonding/slaves linkup $slave done # Set mtu on bond master [ -n "$bondmtu" ] && ip link set mtu $bondmtu dev $bondname # add the bits to setup the needed post enslavement parameters for arg in $bondoptions ; do key=${arg%%=*}; value=${arg##*=}; if [ "${key}" = "primary" ]; then echo $value > /sys/class/net/${bondname}/bonding/$key fi done > /tmp/bond.$bondname.up NO_BOND_MASTER=yes ifup $bondname exit $? done done fi if [ -z "$NO_TEAM_MASTER" ]; then for i in /tmp/team.*.info; do [ -e "$i" ] || continue unset teammaster unset teamslaves . "$i" for slave in $teamslaves ; do [ "$netif" != "$slave" ] && continue [ -e /tmp/team.$teammaster.up ] && exit 0 # wait for all slaves to show up for slave in $teamslaves ; do # try to create the slave (maybe vlan or bridge) NO_TEAM_MASTER=yes NO_AUTO_DHCP=yes ifup $slave if ! ip link show dev $slave >/dev/null 2>&1; then # wait for the last slave to show up exit 0 fi done if [ ! -e /tmp/team.$teammaster.up ] ; then # We shall only bring up those _can_ come up # in case of some slave is gone in active-backup mode working_slaves="" for slave in $teamslaves ; do teamdctl ${teammaster} port present ${slave} 2>/dev/null \ && continue ip link set dev $slave up 2>/dev/null if wait_for_if_up $slave; then working_slaves="$working_slaves$slave " fi done # Do not add slaves now teamd -d -U -n -N -t $teammaster -f /etc/teamd/${teammaster}.conf for slave in $working_slaves; do # team requires the slaves to be down before joining team ip link set dev $slave down ( unset TEAM_PORT_CONFIG _hwaddr=$(cat /sys/class/net/$slave/address) _subchannels=$(iface_get_subchannels "$slave") if [ -n "$_hwaddr" ] && [ -e "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" ]; then . "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" elif [ -n "$_subchannels" ] && [ -e "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" ]; then . "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" elif [ -e "/etc/sysconfig/network-scripts/ifcfg-${slave}" ]; then . "/etc/sysconfig/network-scripts/ifcfg-${slave}" fi if [ -n "${TEAM_PORT_CONFIG}" ]; then /usr/bin/teamdctl ${teammaster} port config update ${slave} "${TEAM_PORT_CONFIG}" fi ) teamdctl $teammaster port add $slave done ip link set dev $teammaster up > /tmp/team.$teammaster.up NO_TEAM_MASTER=yes ifup $teammaster exit $? fi done done fi # all synthetic interfaces done.. now check if the interface is available if ! ip link show dev $netif >/dev/null 2>&1; then exit 1 fi # disable manual ifup while netroot is set for simplifying our logic # in netroot case we prefer netroot to bringup $netif automaticlly [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2" if [ -n "$manualup" ]; then >/tmp/net.$netif.manualup rm -f /tmp/net.${netif}.did-setup else [ -e /tmp/net.${netif}.did-setup ] && exit 0 [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0 fi # No ip lines default to dhcp ip=$(getarg ip) if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then if [ "$netroot" = "dhcp6" ]; then do_dhcp -6 else do_dhcp -4 fi for s in $(getargs nameserver); do [ -n "$s" ] || continue echo nameserver $s >> /tmp/net.$netif.resolv.conf done fi # Specific configuration, spin through the kernel command line # looking for ip= lines for p in $(getargs ip=); do ip_to_var $p # skip ibft [ "$autoconf" = "ibft" ] && continue case "$dev" in ??:??:??:??:??:??) # MAC address _dev=$(iface_for_mac $dev) [ -n "$_dev" ] && dev="$_dev" ;; ??-??-??-??-??-??) # MAC address in BOOTIF form _dev=$(iface_for_mac $(fix_bootif $dev)) [ -n "$_dev" ] && dev="$_dev" ;; esac # If this option isn't directed at our interface, skip it if [ -n "$dev" ]; then if [ "$dev" != "$netif" ]; then [ ! -e "/sys/class/net/$dev" ] \ && warn "Network interface '$dev' does not exist!" continue fi else iface_is_enslaved "$netif" && continue fi # Store config for later use for i in ip srv gw mask hostname macaddr mtu dns1 dns2; do eval '[ "$'$i'" ] && echo '$i'="$'$i'"' done > /tmp/net.$netif.override for autoopt in $(str_replace "$autoconf" "," " "); do case $autoopt in dhcp|on|any) do_dhcp -4 ;; dhcp6) load_ipv6 do_dhcp -6 ;; auto6) do_ipv6auto ;; either6) do_ipv6auto || do_dhcp -6 ;; *) do_static ;; esac done ret=$? # setup nameserver for s in "$dns1" "$dns2" $(getargs nameserver); do [ -n "$s" ] || continue echo nameserver $s >> /tmp/net.$netif.resolv.conf done if [ $ret -eq 0 ]; then > /tmp/net.${netif}.up if [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then > /tmp/net.$(cat /sys/class/net/${netif}/address).up fi # and finally, finish interface set up if there isn't already a script # to do so (which is the case in the dhcp path) if [ ! -e $hookdir/initqueue/setup_net_$netif.sh ]; then setup_net $netif source_hook initqueue/online $netif if [ -z "$manualup" ]; then /sbin/netroot $netif fi fi exit $ret fi done # no ip option directed at our interface? if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then if [ -e /tmp/net.bootdev ]; then BOOTDEV=$(cat /tmp/net.bootdev) if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then load_ipv6 do_dhcp fi else if getargs 'ip=dhcp6'; then load_ipv6 do_dhcp -6 fi if getargs 'ip=dhcp'; then do_dhcp -4 fi fi fi exit 0
Copyright ©2021 || Defacer Indonesia